Even if you love DIY projects around the house, some jobs should be handled by professionals. Because many modern appliances are more complex than they used to be, it’s vital to have a Fircrest, WA, repair service you can count on.
When you’re in the middle of a laundry load and your washer or dryer quits, you can’t wait days for a repair technician to arrive at your home. We understand that your time is precious and the significance of getting your appliances working as fast as possible. Top Shelf Services offers quick same-day or next-day repairs for any of your appliance needs.
How to Know If Your Washer or Dryer Needs Repair
The average U.S. family runs eight to ten loads of laundry through their washer and dryer each week, making these appliances critical to most daily lives. That’s why it’s essential to know if your washer or dryer needs repairs.
You can head off issues before they become costly or dangerous by knowing the warning signs. Here are signs to be aware of:
Fircrest Appliance Repair Services Near Me
253-486-9072
There Is Leftover Water in the Drum
If you grab your freshly washed laundry to toss in the dryer and find it sopping wet, you may need to call a repair technician. This problem often means your washer isn’t correctly draining or spinning the water free following the first cycle.
You may get advice to remove part of your laundry load and repeat the spin cycle, which is an acceptable short-term solution. Yet, if your machine has damaged parts, it may be needlessly stressing them enough to break completely.
Your Washer Makes Thumping, Squealing, or Squeaking Noises
If you hear your washer or dryer making any sounds beyond standard humming, gentle churning, or swishing, it might be a good idea to have a Fircrest washer and dryer repair technician look at your machines and perform a diagnostic check.
The problem could be your idler pulley assembly. This part is intended to give tension to the dryer belt so that it doesn’t slip on the drum or the drive motor pulley when a load is in the dryer. A tell-tale sign this part is failing is a squealing or squeaking sound that can turn into a thumping or loud scraping noise over time.
Often, a diagnostic check is free if repairs are needed, and it’s better to know if there’s an issue as soon as possible to avert costly repairs later on.
Click to contact Top Shelf Appliance Repair Services today
Your Washing Machine or Dryer Fails to Start
If nothing happens once you load your laundry, shut the lid, and push the start button, you may have an issue with one or more of the following parts:
- Door lock assembly: If the latch or other primary component fails, your machine will fail to start or finish the cycle.
- Main electronic control board: This board controls every function in your washer, and if it loses a connection or gets damaged, you will need to replace it.
- Lid switch: This safety mechanism stops your top-load machine if the lid is open. If you’re positive your lid is closed and it still won’t run, you could solve the issue by replacing this part.
- Timer: Your washer’s timer controls several components during its run cycle. If your timer has a short, it may cause your washer to fail.
- User interface board: This board houses the buttons that program your wash cycle. If it’s broken or shorted out, your washer won’t start.
- Motor control board (in front-load washers): This board controls the direction and motor speed of your spin and tumble cycles. If this board shorts out, the motor won’t run, which means your washer won’t start.
To properly diagnose and fix your washer or dryer, call a licensed technician who is experienced with the various components of your machine and can fix it as fast as possible.
Your Dryer Quits Tumbling
If your clothes fail to begin tumbling inside the drum after pressing the start button, you may have a broken or worn-out dryer belt.
This low-cost part connects the motor to the drum and can become brittle or wear out over time. When working correctly, it should feel elastic and have a grip on both sides.
Other parts to consider are the drive motor and the door switch. Call a washer and dryer repair professional in Fircrest, WA, if you aren’t comfortable replacing any of these components yourself.
Your Washing Machine Fails to Fill or Is Slower Than Usual
If you discover your washing machine isn’t properly cleaning your clothes, it may be filling too slowly or not at all. This could mean your washer has a broken or damaged:
- Water valve inlet assembly: This electronically controlled valve manages how full your washer will get. If this valve fails to close while the washer is running, your machine may overfill. Having this valve replaced will properly regulate your washer’s water level.
- Water level pressure switch: The water level in your washtub is monitored by this switch. If it’s damaged or broken, your washer may not fill completely, or it could even overfill.
Check your water level in the middle of the wash cycle and if it’s too low or too high, have these parts looked at by an experienced professional.
Washer and Dryer Repair Services Near Fircrest, WA
When your washing machine or dryer breaks down, it can ruin your week. However, knowing the warning signs of a malfunctioning appliance can save you money down the road and possibly prevent a fire or flood. If you experience any of the signs discussed above, call Top Shelf Services for a fast, friendly diagnosis.
Our Fircrest washer and dryer repair company is family-operated and veteran-owned, and we always treat our clients like they’re family. Plus, we use the online Appliance Blue Book to provide transparent quotes with no fees, and on top of that, all our repairs are guaranteed. So, contact us to set up a free service call today!
To Schedule Same Day Or Next Day Service With an Appliance Repair Technician in Fircrest, Call 253-486-9072
