There are several reasons your dryer isn’t heating up and drying your clothes. It could be a failed heating element, clogged dryer vent, main control board issues, power supply problems, or something else entirely. If one or more of these is in your dryer, it won’t heat up and dry your clothes.
There are things you can do to fix the problems and repair your broken-down dryer. However, most of these are technical in nature and require a solid grasp of DIY appliance repair. If you do not have any do-it-yourself experience, it’s best to allow a Tacoma dryer repair service to come to take care of that for you.
As with all appliances, dryers are subject to the usual wear and tear that comes with frequent use. Although most components are manufactured to last, they may fail or malfunction.
Failed Heating Element
While these can stop working due to age and use, the common reasons they fail include washer or dryer overload, lack of ventilation to the heating element area, power surge, faulty temperature circuit breaker, and dirty or limited lint screen.
Unless you’re very handy and have experience with these kinds of issues, it’s best to allow experienced dryer repair companies in Tacoma, WA, to come fix this issue for you.
Appliance Repair Services Near Me
Poorly Functioning Timer
Most modern dryer units have timers indicating when they need to get hot and when to stop heating the clothes. So, it goes to reason that if these timers are not running as they should, it can impede the heating functions.
The best way to determine this is to look at the timer when the machine is working and see if it’s ticking at the regular pace or running slower than it should. If it’s moving slowly or not at all, then you know that’s why your dryer isn’t doing its job.
There can be a number of things wrong with the timer. It’s possible that the motor components have malfunctioned or there is a wiring problem with the electrical contact, among other issues.
Faulty or Blown Thermal Fuse
If your dryer’s thermal fuse is faulty or blown, chances are your dryer’s exhaust vent is blocked. A blocked exhaust vent causes the dryer to overheat, which burns the heating elements and other critical components.
The simplest solution is changing the thermal fuse and cleaning out the exhaust vent in the machine. If you’re a handy person, this can be a pretty easy fix. But if you don’t know your way around dryers, best leave it to the pros.
Poor Power Supply to the Dryer
This is pretty self-explanatory. If your dryer doesn’t get the power it needs to run, it won’t work. And even if it runs, it may not heat up. To identify the source of the problem, check the power sockets, wires, or gas lines.
If you use gas, make sure that it’s shut off. You can do this by simply checking the gas controls. If the control is open but the heater isn’t working, please let an expert repairman do this instead of tinkering with things you’re not familiar with. This is better than causing fire or being electrocuted.
Problematic Gas Solenoid Valve
This only applies if you use a gas-powered drying machine. These machines have a gas solenoid valve that allows gas in or shuts off the supply. Dryer installation experts carefully calibrate these to ensure that your dryer only gets adequate gas when necessary.
If this malfunctions or becomes faulty, it can prevent gas flow to the dryer. And in turn, the heating element won’t work. Replacing or repairing a gas solenoid valve should only be done by an expert dryer repairman. Trying to fix it yourself may lead to fires within the home.
Temperature Regulators Are Faulty
Every dryer has a temperature regulator aka a thermostat. These are designed to “tell” the machine when to turn on the heating and when to shut it off. If your thermostat isn’t working effectively, your machine won’t know when to use the heating and when not to.
This is why the machine refuses to heat up and when it does, it may not be often or it may cut out too frequently. This can cause all sorts of problems. Fixing this requires the use of certain electrical gadgets like a multimeter to detect where the fault is and what’s wrong.
Hire a Professional Dryer Repair Service in Tacoma, WA
If you live in and around Tacoma, WA, and are struggling with a dryer that just won’t heat up, you should contact us immediately. Our Tacoma dryer repair technicians can diagnose what the specific problems are and fix them for all brands and types of dryers. And because we understand how important the dryer is to you, we’ll work hard to repair the fault very quickly so that you can go back to doing your laundry and drying your wet clothes.
Contact us today to schedule an appointment and one of our professional dryer repairmen will be with you.
Click to contact Top Shelf Appliance Repair Services today